Split Butterfly Valve for Powder Transfer Applications
Keep momentum on this opportunity
Save it on this device now. Create an account when you are ready to track deadlines, notes, and teamwork.
- Save and reuse search filters
- Track opportunities as pursuits
- Get notified when new notices match
Keep this notice in a shortlist so you can return to it without starting a bid.
Keep notes, monitor deadlines and collaborate with your team. This does not submit a bid or contact the buyer.
Key information
Overview
UKNNL are seeking expressions of interest from suppliers capable of providing a split butterfly valve system suitable for powder handling and transfer operations. Minimum Technical Requirements • Be suitable for the transfer of powders and quick-connect/disconnect operations. • Accommodate connections in the region of: -100 mm to 50 mm diameter, or -100 mm to 80 mm diameter to minimise the potential for product blockage. • Be compatible with hydrofluoric acid (HF Resistant) at concentrations of approximately 25-50% by mass. • Be suitable for operating temperatures up to approximately 300°C. • Be suitable for operating pressures from full vacuum to approximately 3 barg. Additional Information • An integrated vacuum system for removal of powder from between split butterfly valve faces is not required. • Alternative materials of construction may be considered such as stainless steel. • Particular attention should be given to the suitability and chemical resistance of sealing materials for hydrofluoric acid service. • Sealing materials must be suitable for hydrofluoric acid (HF) at the specified process concentrations.
Procurement Act 2023
UKNNL welcomes information from suppliers on what you have available and if suppliers have supplied similar equipment before. If you are able to supply this piece of equipment listed please get in touch with [email protected]